Click Photo to Enlarge
|
|
With Spring - O-Ring/Spring Materials (valves with EPDM or FPM o-rings are normally supplied with 316 SS springs). Valves are supplied with o-rings set into body faces. In most cases flange gaskets will not be required. Valves up to 8” usually require a spacer and should always be used with the same material as the valve. Spacers allow full disc opening with minimum interference with pipe I.D., and are required when using schedule 80 pipe. Spacers are not required for DIN and PVDF pipe. PVC and PPL prices include spacers up to 8”. PVDF prices do not include spacers. Valve sizes up to 40” are available on special order.
Backflow Prevention: Hayward Wafer Check Valves prevent reversal of flow in piping systems. They are ideal where backflow could potentially cause damage to pumps, filters, or process equipment.
Easy Installation: Hayward Wafer Check Valves are light weight and designed for easy installation. The valve's wafer body slips between standard flanges and can be used in either vertical or horizontal operation (disc spring version should be used for horizontal piping).
Reliable Operation: Hayward Wafer Check Valves operate without the need for any adjustments or settings. The valves plastic disc, with replaceable O-ring seals, is designed to provide a bubble-tight flow shutoff. When inlet flow stops, back pressure moves the disc with its O-ring seal into the valves plastic body-shutting-off the flow (back pressure required is dependent on valve installed position and size. Consult us for details).
Two Available Models: Hayward Wafer Check Valves are available in two types. A lower cost version without a disc spring is available for applications where it is not desirable for the process stream to come in contact with metals. A version with disc spring is recommended for pulsating flow and horizontal piping applications where faster disc closure is required to reduce the amount of backflow and possible water hammer.
No Corrosion: All-plastic construction of Hayward Wafer Check Valves ensures these valves will never jam or stick because of rust or corrosion. They will not contaminate sensitive process fluids they come in contact with, and require no painting or coating to stand up to corrosive environments. 007
Model Number:
WC5200VS
Part Number:
10-3685
Weight:
2 lb
Your Price:
CALL
|